marți, 13 septembrie 2016

8027 Diteq Blu-Drill 30in SS-300R Wall Saw

SS-300R Concrete Wall Saw Features
  • Chassis can be clamped anywhere on the track
  • 2 speed 300/700 Rpm
  • Easy to read depth gauge.
  • Auto travel control
  • Standard Kit includes

    • 27 amp, 110Volts, single phase electric motor, 2 speed 300 or 700 rpm
    • 2 track included one 3.93 ft (1.2m), one 1.97 ft (0.60m) track
    • Travel motor with auto travel control
    • 30" blade guard.
    • Optional flush cut flange available

    Discounted at only: US$ 13999.00



    6135 Alpha Numero Uno Diamond Blade

    Alpha Numero Uno Premium Wet Saw Blade for Stone Tile
    • Fast cutting blades.
    • For use on hard vitreous ceramics, porcelain tile, marble, granite, & slate.
    • Advanced rim style reduces the risk of chipping & breaking work pieces.
    • Designed for cutting granite, marble and engineered stone.
    • Available in sizes to fit most tub and tile saws and the Alpha Wet Stone Cutters.
    • For a long time, tile installers used expensive dry cutting blades to cut harder types of natural stone tile because there were no blades available designed to cut harder materials with wet saws.
    • Alpha Numero Uno is the first diamond blade developed specifically to fill this void, and it has lowered the cost of installing granite and harder types of natural stone tile.
    • Tile installers and tile shops will find that Numero Uno will cut the most difficult natural stone tiles quickly and efficiently.
    • Cost-effective and easy to use.
    • Numero Uno is the number one choice of blades for tile contractors and tile shops.
    Discounted at only: US$ .00


    7792 Husqvarna KV750 Water Tank

    Husqvarna KV750 Water Tank
    • For use on KV750 Cutting Cart
    • 4-Gallon water tank
    • Water tank is designed to allow for a clear view of cutting
    • The 4-gallon tank allows for 15-20 minutes of operation

    Discounted at only: US$ 187.00



    7854 Toker CM Concrete Mixer

    Toker CM Concrete Mixers
    • Free shipping from factory warehouse
    • The drum has a 3/16 lip and heavy duty one-piece cast iron ring gear for longer life
    • Multi-position dump latch
    • Oversized dump wheel, easier to discharge material
    • Heavy duty retractable tow tongue made through schedule 80 with 2 secure locks
    • Available with 2" ball or pintle hitch
    • Emergency stop switch
    • Heavy duty and efficiently ventilated shroud
    • High speed hubs with a greasable zerk
    • Axle springs for less bounce, less sway
    Discounted at only: US$ .00


    6150 Diamond Hole Saws Turbo Rim

    Diamond Hole Saws Turbo Rim
    • Dry cutting turbo rim
    • Drills holes through marble, floor tile
    • Use dry or wet.
    • Pilot bits are included with bits 1" or larger
    • Diamond Hole Saw Kit available (1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2" & 1 dressing stone)
    Discounted at only: US$ .00


    8319 Northrock Pro 50 4S Backpack Concrete Vibrator

    Northrock Pro 50 4S Backpack Concrete Vibrator
    • Honda GXH-50 4-Stroke Engine, Uses regular gas, no need to mix oil with gas
    • High efficiency synchronous drive belt transmission with cast aluminum housing that steps up engine speed to achieve optimal vibrations per minute
    • Universal counter shaft accommodates all brands of vibrators so you can use the shafts and heads you already stock
    • Strong steel tubular frame with ergonomic molded back pad and padded shoulder straps
    • Power vibrator heads from 3/4" to 2 1/2"
    • Free shipping

    Discounted at only: US$ 1525.00



    6885 Partner by Husqvarna K750 Concrete Saw

    K750 Concrete Saw

    The Husqvarna K 750 belongs to the new generation of power cutters developed from the ground up, inside and out. Our unique engine technology, DualCharge™, brings you a highly powerful 3.7 kW engine with low emissions and good fuel economy. It's simply a cleaner, more efficient engine.

  • Free shipping
  • The only power cutter with a 1 year warranty
  • Suitable for:

    • Concrete cutting
    • Pile cutting
    • Minor asphalt work
    • Masonry work
    • Gas/water/sewer maintenance
    • Landscape work

    DualCharge

    The secret behind the DualCharge™ technology is that you use twin flushing ducts: one for clean air and one for the fuel /air mixture. First, a barrier of clean air presses out the burnt gases, after which the fuel /air mixture is flushed in. The result is a more powerful engine, better fuel economy and a drop in emissions by fully 70%, compared to previous cutter generations. Also, the fuel mixture that passes the main bearings and crank bearings is more concentrated, so it lubricates the engine more effectively. (1) Fuel-air mixture. (2) Clean air. (3) Clean exhaust gases.

    Fewer vibrations and less noise

    The K750 has an entirely new vibration damping system. The fuel tank, handle and intake system is an entirely new vibration damping unit that gives particularly low handle vibrations. The muffler has been doubled in size and with the large intake system allows the motor to run quieter at higher powers.

    New Active Air Filtration

    Three separate filter systems. The first system uses the centrifugal force at the cooling fan and separates 80-90% of the dust particles from the intake air. A settling compartment has been fitted where any extra dust settles, which mean the filter stays clean even longer. The intake air then passes through a second stage in the form of an oil impregnated 3-layer adhesive filter that catches any remaining dust particles. The third stage is a traditional paper filter, which represents an extra level of security preventing dust particles from mixing with the intake air. This extends the cleaning interval for the fixed filters 3.5 times (compared to conventional filter systems), which reduces idle time and service costs.

    Other Features

    • The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.
    • EasyStart ensures 50% easier starting by reducing the compression in the cylinder during starting.
    • Robust new wet cutting kit, with low water usage.
    • Sealed transmission reduces the wear and slippage risk.
    • Fuel indicator on the tank shows fuel level, to help avoid unnecessary stoppages.
    • Easy-adjust blade guard, replaceable arbor bushing.
    • 25% less noise thanks to a larger muffler.
    Discounted at only: US$ .00


    9617 Rubi Wall Tile Wedges

    Rubi Wall Tile Wedges
    • 3/16" (5mm) & 5/16" (7.5mm) Rubi Plastic Wedges
    • Bags of 500 pcs.
    • If the Wedge bottoms out before opening the joint wide enough, just snip off the end and the wedge will be larger.
    • Ideal for use with wall tiles. Rubi tile wedges allow for excellent finishing with total precision due to the homogeneity of their measurements and the absence of rough edges and small defects.
    • Tile wedges align tiles in vertical installations so the grout lines are even throughout the installation.
    • Works with all sizes of ceramic tile, porcelain, stone, and marble.
    • Perfect for back-splash installations.
    Discounted at only: US$ .00


    9202 Core Cut CC1300XL Accessories

  • 5 Gallon water tank kit (includes 5 gallon tank, petcock, hose, coupler and bungee style tie-down)
  • Water tank not available for electric saw models
  • Extended blade shaft kit, up to 1" spacing
  • Propane Conversion Kit for 9 hp Honda (4.7 gallon tank)*
  • Propane Conversion Kit for 13 hp Honda (4.7 gallon tank)
  • Propane conversion kit includes: Conversion to dual fuel, safety fuel lock, liquid propane fuel tank with fuel gauge and safety check connector
  • Extra Slip-On Blade Guard 14"
  • Extra Slip-On Blade Guard 18"
  • Extra Slip-On Blade Guard 20"
  • Discounted at only: US$ .00



    9460 Bosch HS1918 6in x 25in SDS-Max Floor Scraper

    Bosch HS1918 6" x 25" SDS-Max Floor Scraper
    • Made for removing tile and other flooring
    • Chisel Width 6", Length 25", SDS-Max Shank

    Discounted at only: US$ 249.99



    9455 Alpha Scratch Removal Kit

    Alpha Scratch Removal Kit

    Designed with stone fabricators in mind, this kit comes with everything you need for scratch removal and seam polishing in the field. Start with the How-To Video to learn the proper scratch removal technique, then utilize the Alpha® Twistouch Turbo system to polish the fl at surface without the wavy finish caused by most flexible polishing discs.

    • The AWP-158 comes with a "C" handle and a flat polishing caster designed to improve stability during scratch removal and seam polishing for superior results.
    • Great for Seam Polishing and Removing Scratches!
    • Fool proof hand held application

    Alpha Scratch Removal Kit Includes:

    • Alpha AWP-158 Alpha Electric Wet Polisher
    • 3" Twistouch System 100, 200, 500, 1000, 2000, 3000 Grit & 3" final buff
    • TW25/8AL Twistouch backer pad
    • Alpha Apron
    • Scratch removal DVD

    Discounted at only: US$ 679.99



    8320 Northrock Pro 3200 Series Power Screed

    Northrock Pro 3200 Series Power Screed
    • Eccentric design with 60% more power for high productivity and ease of use.
    • Wrap-around frame design provides greater strength and better isolation.
    • Patented magnesium blades cur and roll the concrete in front of the screed, reducing the need for grading while the ten inch wide shoe promotes flatter floors.
    • Available with blades form 4 ft to 14 ft for one man operation and 16 ft to 22 ft for two man operation.
    • 31cc. 4 cycle Honda gasoline engine power a well engineered and field proven eccentric system to frequencies up to 6000 Vpm.
    • This system is mounted on an angle to the blade, allowing the vibration to be transmitted both horizontally and vertically.
    • The combination of high frequency combined with the angled eccentric system design promotes smoothness and rapid consolidation of the mix.
    • Large rubber shock mounts direct vibrations away from the operator and down into the mix.
    • A strong, light weight frame allows the blades to be changed in seconds while the pull handles adjusts quickly to the operators height for optimum productivity.
    • Power unit and frame weigh in at only 28 lbs making the system easy to maneuver and transport around the site.
    • Max bar length 12 ft. per power unit.
    • 10 ft to 22 ft bars ships by truck freight.

    Discounted at only: US$ .00



    6306 Qep Bull Eye Clear View Tile Spacer 100pcs

    6306 Qep Bull Eye Clear View Tile Spacer 100pcs
    • Bulls•Eye ClearView Spacers are an economical and user-friendly solution for creating evenly spaced grout joints.
    • The unique, patented design keeps the spacers out of the thinset and provides a clear view of grout lines and corners.
    • One Bulls•Eye Spacer does the job of four traditional spacers thus reducing the amount of total spacers needed for each job.
    • Additionally, each Bulls•Eye Spacer provides two different grout size options, offering either 1/16" and 3/16" joints (item #10067) or 1/8" and 1/4" joints (item #10068).
    • Each bag of Bulls•Eye Spacers comes with 100 spacer rings and 50 mini-wing spacers for use on corners along walls and angles.
    • These spacers are easy to remove, reusable and perfect for floor and wall tile applications.
    • Bulls•Eye ClearView Spacers, unobstructed grout lines for dead-on accuracy.
    Discounted at only: US$ 6.24


    7546 Supersoft XL Knee Pads

    XL-Supersoft Kneepads
    • XL-Soft neoprene knee pads with hook and loop fasteners.
    • Patented design of the Supersoft kneepad provides a front fastening system.
    • The Supersoft has no buckles or fasteners behind or on the side of the leg.
    • The strap is so soft and comfortable.
    • Leartherhead last longer
    • front fastener stays in place and allows a free range of motion.
    • Comfortable neoprene is 100% washable and is less likely to bind and cause rash.
    These are the only kneepads that can be worn with short pants
    and not irritate your legs!
    Discounted at only: US$ .00


    9481 Multiquip GA29R 5.7 HP Robin Portable Generator 2,900W

    Multiquip GA29R 5.7-HP Robin EX17D Portable Generator

    Provides clean, dependable power for construction sites or residential applications. Built for rugged job site conditions but compact and lightweight enough for two people to easily lift into a truck bed.

    Features:

  • 100% copper windings for maximum conductivity
  • Alternator design eliminates maintenance by removing brushes and slip rings
  • Runs for six hours on a full tank at full load
  • Powered by a 5.7-hp Robin engine with low-oil shutdown.
  • Heavy-duty 1-inch (25 mm) steel pipe frame and shock mounts protect the generator
  • Superior voltage regulation helps to keep tools and equipment running at optimal levels; helps them last longer.
  • Wheel Kit Available Item: 8054
  • The best warranty in the industry, all GA-Series generators are covered by a two-year parts and labor warranty.
  • Silent Type Muffler Reduces noise level.
  • Voltmeter, this feature serves as a convenient diagnostic tool on the jobsite. The operator can quickly tell whether or not the generator is producing the correct voltage and prevent overheating of expensive tools and equipment.
  • Mecc-Alte brushless alternator used on this model are manufactured to exacting specifications using the latest mass production methods.
  • MQ Power generators use technology to control the voltage with a voltage variation less than 3% throughout the entire power range. That means you can use this generator with computers and sensitive electronics, safely, with no sacrifice in performance.
  • MQ Generator
    GA25H
    Dry weight
    108 lbs
    Generator Length x width x height
    20" x 16" x 18"
    Continuous Watts
    2.6 kW
    Maximum Watts
    2.9 kW
    Max. Amp @ 120V
    24.2 A
    Cont. Amp @ 120V
    21.7 A
    Engine
    Robin EX-17D
    Running Time (hrs)
    5 hrs
    Fuel capacity
    3.2 US gal
    Horse Power
    5.7 hp
    Sound Level dB@ 23 ft.
    71 dB(A)

    Discounted at only: US$ 1079.99



    7773 BARWALT ULTRABITE Replacement Carbide Tips

    Barwalt ULTRABITE Replacement Carbide Tips
    • Replacement tips make worn nippers like new!
    • Includes two new nuts and wrench.
    • Made in USA.
    Discounted at only: US$ 21.99


    7461 Diteq Vacuum Brazed Profile Wheel

    Diteq Vacuum Brazed Profile Wheel
    • For fast clean profiling of Granite, Porcelain.
    • 5/8" arbor.
    • Vacuum Brazed Profile Wheel.